Products Catalog

Specification

Ideal for measuring current with low frequencies such as inverter control devices :

- Superb low frequency and phase characteristics suitable for testing the current and power of inverter control devices
- Wide 1Hz to 100kHz frequency bandwidth perfect for harmonic analysis, FFT analysis and waveform monitoring

Basic specifications (Accuracy guaranteed for 1 year) :

Rated current : AC 20A, or AC 200A (selectable)
Accuracy : Amplitude: ±0.3%rdg. ±0.01%f.s. Phase: ±0.2deg. (45 to 66Hz)
Frequency band width : 1Hz (±2% rdg. ±0.1% f.s.) to 100kHz (±30% rdg. ±0.1% f.s.)
Output rate : 2V/20A rated current range, or 2V/200A rated current range (voltage output with the Sensor Unit 9555-10, use with a device having a 1Mohm input resistance or higher)
Max. current input : 20A range: 50A rms Max. 200A range: 300A rms Max.
Max. circuit voltage : 600V rms (insulated wire) (measurement category III)
Core jaw diameter : Æ 46mm (1.81in) or 50mm (1.97in) × 20mm (0.79in) busbar
Power consumption : ±11V to ±15V (tracking), 5VA Max. (use with the Sensor Unit 9555-10, which is powerd by AC 100 to 240V)
Dimensions, mass : 78mm (3.07in)W × 190mm (7.48in)H × 35mm (1.38in)D, 430g (15.2oz) Cord length: 3m (9.84ft)
Supplied accessories : Carrying case × 1, Mark band × 6

Note: Connect and power up Clamp-on sensor to use in combination with the oscilloscope, or the MEMORY HiCORDER