Aluminium Alloy Screen Frames

Quantity Order:

Specification Ideal frame size
P1 25 x 25 x 1.0mm 300 x 400mm
P2 25 x 25 x 1.3mm 400 x 500mm
P3 30 x 30 x 1.0mm 400 x 450mm
P4 30 x 30 x 1.3mm 500 x 650mm
P5 25 x 40 x 1.0mm 400 x 450mm
P6 25 x 40 x 1.1/1.2mm 450 x 500mm
P7 25x 40 x 1.4mm 600 x 800mm
P8 25 x 40 x 1.5/1.8mm 600 x 1000mm
P9 22/28x 45 x 1.25 600 x 800mm
P10 25/29 x 50 x 1.3mm 800 x 1000mm
P11 35/40 x 70 x 1.8mm 1000 x 1200mm
P12 30/35 x 70 x 1.8mm 1000 x 1200mm
These Al-frames are suit for table-pipelining manual printing, such as T-shirt, plastic, toy and leather and so on
These frames are used by manual printing on table only
Outside dimension: +/- 0.04-inch
Squareness: +/- 2 degrees
Flatness: not to exceed 0.02-inch
Bow: not to exceed 0.04-inch at standard tension with standard frames size
Finish: grinded on both sides
Package: plastic tape or cartons(for exporting)
Caution:
Al pipe mode's choosing is by your printing needing and referencing to the data for best frame's size
Problematic frames will result in following terrific phenomena, contorted mesh, deformed stencil-making, depressed tension, short life and moved printing location and so on
All frame size should lie on printing size and types, and there is an enough space for ink holding out of available printing size

Recommend to your friends